2. Release the control cable from the shift lever. Disconnect the cable and lever.
3. Set the manual shift lever to position N.
4. Rotate the shifter housing until the 12mm wide end of the manual shift lever is positioned against the 12mm wide flange of the switch body.
5. Tighten the mounting bolts (2 pcs.) the required moment.
- Tightening torque of the gearbox selector mounting bolts: 10-12 Nm.
6. Make sure the shift lever is in the N position.
7. Adjust the nut so that there is no slack in the control cable and make sure that the shift lever moves shift lever worked smoothly.
8. Move the car and while driving, make sure that each gear is engaged in the gearbox in the desired position.
