2. Turn off the engine.
3. Remove the oil filler cap (on the valve cover) and remove the drain plug (on oil sump). Drain oil from the engine.
4. Screw in the drain plug and tighten it to the required torque.
- Tightening torque: Drain plug - 35-45 Nm.
5. Fill the crankcase with fresh engine oil through the filler neck.
- Filling dry engine - 4.3 l
- Draining the oil and refilling:
- Without oil filter - 3.7 l
- With oil filter - 4.0 l
Warning. Do not overfill crankcase. This can aerate the oil and reduce its pressure.
6. Install the oil filler cap.
7. Start the engine and let it run.
8. Turn off the engine and check the oil level. Add oils if necessary.