Removal and inspection
Warning:
- 1. The throttle body must not be removed.
- 2. If the Phillips screw is too tight, use only a screwdriver specifically designed for these screws.
Cleaning the Chassis Components
1. Clean all components. The following components should not be cleaned by immersion in solvents:
- Throttle position sensor;
- Engine idle speed control;
The insulation of these components may be damaged if they are immersed in a cleaning solvent. They should only be cleaned with a piece of cloth.
2. Check that there are no foreign objects in the vacuum channel. Clean it with compressed air.
Fuel tank
See the relevant subsection under «Engine with two camshafts».
Engine management
See the relevant subsection under «Engine with two camshafts».