Car steering Hyundai Sonata 3

Specifications
Steering - Rack and pinion, with crumpling and tilting steering column Steering gear ratio - 48.39 Number of gear teeth - 7 Rail travel - 150 mm Oil Pump - Vane...

Tightening torques
Steering column and shaft Steering column mounting bolt - 8-12 Fastening the steering column to the front shield - 9-14 Steering wheel lock nut - 40-50 Hinge assembly -...

Steering lubricants
Knot Recommended lubricant Quantity Steering column bearing Multipurpose grease SAE J310, NLGI No. 2 On demand Steering rack Multipurpose grease SAE J310, NLGI No. 2 On...

Steering wheel adjustment
Steering wheel play check 1. Start the engine with the wheel position for straight steering. 2. Measure free play (backlash) steering wheel, measured around the...

Checking the tension of the power steering belt
1. Apply a force of 98 N to the V-belt (10 kgf) and measure the deflection of the belt. Belt deflection (norm) — 7-10 mm 2. To adjust the belt tension, loosen the...

Oil pump pressure test
1. Disconnect the hose from the oil pump and connect the special tool between the pump and the hose. 2. Remove air from the system. Start the engine and turn the...

Bleeding the system
1. Disconnect the high voltage drive and operate the starter for a while (15-20 sec.), turn the steering wheel left and right 5 or 6 times. Comment: 1) While bleeding...

Steering column and shaft — removal, check and installation
Withdrawal 1. Loosen the screws, lift up the horn pad and remove it. 2. Remove the lock nut and washer. Warning. Before performing these operations, read the chapter for...

Power steering oil pump — removal, disassembly, inspection, assembly and installation
Withdrawal 1. Remove the pressure hose from the oil pump. 2. Disconnect the suction hose and drain the working fluid into a container. 3. Loosen the tensioner mounting...