Car rear suspension Hyundai Sonata 3

Rear Suspension Specifications and Lubricants
Specifications Suspension type - Double rod and push arm Shock Absorber - Coil Spring Type — Hydraulic, double-acting Maximum length - 503 mm Minimum length - 335 mm...

Tightening torques
Wheel bearing nut - 200-260 Nut of fastening of the shock-absorber (upper) — 40-50 Nut of fastening of the shock-absorber (lower) — 80-100 Stabilizer bar nut — 35-45...

Checking the installation of the rear wheels
Collapse Standard value — -30'±30' To perform adjustment operations, loosen the lower rod mounting bolt. Note. Auxiliary rod mounting bolt (from the side of the cross...

Rear suspension — dismantling, checking, installation
Dismantling 1. Turn away nuts of fastening of shock-absorbers, remove bracket of a disk brake and a disk, disconnect a hose and nuts of fastening of a cross element. 2....

Shock absorber — removal
Withdrawal 1. Turn away the top nut of fastening of the shock-absorber. 2. Remove the tire. 3. Turn away a nut of fastening of a core of the stabilizer of cross-section...

Shock absorber — disassembly, inspection and assembly
Disassembly 1. Before loosening the piston rod nut, compress the coil spring with the special tool. Warning. Do not use a pneumatic tool to tighten the bolt. 2. While...

Upper, Lower, and Auxiliary Rods — Disassembly and Inspection
Dismantling and checking 1. Remove shock absorber. 2. Remove the top stem. Using the special tool, disconnect the ball joint and trunnion. Warning. When using a special...

Push trailing arm — removal and inspection
Withdrawal 1. Turn away a bolt of fastening of a brake line. 2. Turn away bolts of fastening of bracket of a disk brake and then remove bracket. 3. Remove the brake...

Rear wheel hub — removal, inspection and installation
Withdrawal 1. Remove the rear wheel speed sensor (for vehicles with ABS). 2. Remove the bracket assembly, then hang it up. 3. Remove the brake disc. 4. Remove the hub...