Cooling system specifications Technical data Name Values Cooling system Liquid with forced circulation and electrically driven fan Coolant volume, l - engine 1.1 l 6,0 - engine 1.3 l 6,2 - engines...
Features of the cooling system device Hyundai car engines are equipped with a circulating cooling system. A centrifugal pump is used to circulate the coolant. The engine cooling system consists of a cooling...
The tightness of the cooling system 1. Wait until the engine cools down and remove the radiator cap. 2. Make sure that the coolant level reaches the lower edge of the filler neck. 3. Install the radiator...
Coolant replacement Attention! When draining the coolant, make sure that the cover of the relay box in the engine compartment is securely closed and prevent the coolant from getting on the...
Coolant density 1. Use a hydrometer to measure the specific gravity of the coolant. The relationship between the concentration of antifreeze in the coolant and the specific gravity...
Pipes and hoses of the cooling system Examination 1. Check up pipes and hoses of system of cooling on absence of damages, cracks and swellings. 2. If necessary, replace damaged parts. Hose replacement Make...
Water pump — removal and installation Withdrawal 1. Disconnect a wire from the negative plug of the storage battery. Drain the coolant into a suitable container and disconnect the hose from the coolant...
Radiator cap — check Radiator cap: 1 - inlet valve; 2 - exhaust valve Examination 1. Remove all debris from the Hyundai Getz radiator cap valve and valve seat. 2. Attach the radiator cap to...
Thermostat — removal and installation Thermostat: 1 - valve for air release; 2 - main valve; 3 - bypass valve Removal and inspection 1. Drain the coolant to a level below the thermostat. 2. Remove the...