Withdrawal
1. Disconnect a wire from the negative plug of the storage battery.
2. Turn out screws of fastening of the bottom decorative panel located under the panel of devices.
3. Turn out screws of fastening of the lateral decorative panel and remove it from the panel of devices.
4. Remove an arm of support of the panel of devices from outside the driver.
5. Disconnect the connectors from the fuse box.
Examination
1. Make sure the fuses are securely in their sockets.
2. Make sure the fuse is rated for the circuit it is protecting.
3. Check the integrity of the fuses. If the fuse needs to be replaced, use a new fuse of the required capacity. Always determine the cause of a blown fuse and repair the source of the problem before installing a new fuse.
Electrical circuits protected by fuses and blown jumpers located in the engine compartment
Circuit | Current, A |
| Accumulator battery | 50 |
| Generator | 100 |
| Condenser | 20 |
| Ignition | 30 |
| ABS 1 | 30 |
| ABS 2 | 20 |
| Radiator | 20 |
| ECM | 20 |
| Fan | 30 |
