Manual gearbox cars Hyundai Elantra 1

General description of a manual transmission
When starting and accelerating the car, the torque on the wheels should change from the maximum to the minimum value. Therefore, in the transmission between the wheels...

Gearbox — removal and installation
All models As a rule, gearboxes are removed downwards. Therefore, you will need an appropriate jack or 4 stands to lower the gearbox. Withdrawal Disconnect the ground...

Gear shift mechanism
All vehicles covered in this publication have a cable shift mechanism. In the new transmissions, the gear lever, shift cable and transmission selector cable have been...

Gear Lever Adjustment
Vehicles with shift cable adjuster Typical Lever Arrangement 1 - central; 2 - gearshift lever; 3 - gear selection lever; 4 - gear selection cable. Gear selector cable...

Repair Recommendations
When checking and assembling, wash all parts with solvent and dry with compressed air. Lubricate oil seals with clean gear oil and thrust bearings with petroleum jelly....

Gearbox up to 2000 release — disassembly and assembly
Elements of the gearbox housing (models up to 2000 release) 1 - clutch housing; 2 - secondary shaft; 3 - intermediate shaft; 4 - input shaft; 5 - shift forks; 6 - oil...

Input shaft — disassembly and assembly (gearbox up to 2000 release)
Input shaft elements (models before 2000) 1 - input shaft; 2 - needle bearing; 3, 16 - ball bearing; 4 - synchronizer lock; 5 - 3rd gear gear; 6 - synchronizer ring; 7 -...

Intermediate (secondary) shaft — disassembly and assembly (gearbox before 2000 release)
Elements of the intermediate (secondary) shaft (models before 2000) 1, 10 - bearing; 2 - bearing race; 3 - needle bearing; 4 - gear wheel of the 1st gear; 5 -...

Differential — disassembly and assembly (gearbox before 2000 release)
Differential elements (models before 2000) 1 - bearing; 2 - axis; 3 - differential box; 4 - bushing; 5 - washer; 6 - satellite; 7 - axle gear; 8 - differential gear....

Transmission since 2000 release — disassembly and assembly
Elements of the gearbox housing (models from 2000 release) 1 - back cover; 2 - gearbox housing; 3 - installation elements of the input shaft; 4 - installation elements...

Input shaft — disassembly and assembly (gearbox since 2000 release)
Disassembly Remove the lock washer and front ball bearing. Remove the bearing race. Remove the bearing. Remove the spacer, lock washer, spring and driven gear. Remove...

Intermediate shaft (secondary) — disassembly and assembly (gearbox since 2000 of release)
Disassembly Using a tool, remove the lock washer, bearing, 1st gear and bearing race. Remove the synchronizer ring, synchronizer spring, 1st and 2nd gear synchronizer...

Differential — disassembly and assembly (gearbox since 2000 release)
Differential elements (models since 2000) 1 - bearing; 2 - axis; 3 - differential box; 4 - bushing; 5 - washer; 6 - satellite; 7 - axle gear; 8 - differential gear....