Car front suspension Hyundai Accent 3

Specifications of the front suspension
Shock absorber travel 163 mm Damping force of compression stroke (rod travel speed 0.3 m/s) 304±68 N Recoil damping force (rod travel speed 0.3 m/s) 657±107N Total...

Front wheel suspension
1. Upper rack support; 2. Nut; 3. Shock absorber; 4. Bolt; 5. Knuckle; 6. Lower arm; 7. Bolt for fastening the front silent block; 8. Subframe; 9. Bolt for fastening the...

Removal and installation of a rotary fist
1. Retaining ring; 2. Wheel bearing; 3. Steering knuckle; 4. Dirt shield; 5. hub; 6. Brake disc; 7. Screw; 8. Wheel; 9. Wheel nut Withdrawal 1. Remove the wheel. Nut...

Disassembly and assembly of the steering knuckle
Disassembly 1. Loosen the screws (1) and remove the brake disc (2) from the hub (3). 2. Remove retaining ring (4). 3. Install the special puller as shown. Remove the hub...

Removal and installation of a rack of the shock-absorber
1. Nuts; 2. Self-locking nut; 3. Washer; 4. Rack support; 5. Upper spring support; 6. Rubber gasket upper spring seat; 7. Boot and buffer compression; 8. Spring; 9....

Disassembly and assembly of the shock absorber strut
Disassembly 1. Using a special tool, compress the spring (1). Unscrew the nut (2) shock absorber rod (3). 2. Remove the top support, top cup, top cushion and boot....

Removal and installation of the lower arm
1. Ball joint 2. Lower arm 3. Front silent block 4. Rear silent block Withdrawal 1. Remove the wheel. Nut tightening torque: 90-110 Nm. 2. Loosen the screws (1) ball...

Silent block replacement
1. Using suitable mandrels, press the silent block out of the lever. 2. Apply soap solution to the inner surface of the lever and the outer surface of the silent block....

Removal and installation of the stabilizer bar
1. Stabilizer clamp 2. Sleeve 3. Stabilizer 4. Stabilizer hose Withdrawal 1. Remove wheels. Nut tightening torque: 90-110 Nm. 2. Loosen the nut (1) and disconnect the...