Manual gearbox Hyundai Accent 2

General information about manual transmission
The gearbox converts the torque transmitted from the engine in magnitude and direction. This is necessary to ensure optimal speed and maneuverability of the vehicle, as...

Technical data
Type M5AF3 Transmission oil SAE 75W–90 (API–GL–4) Oil volume 2.15 l

Checking the oil level
Inspect the gearbox for oil leakage. After removing the filler plug, check the transmission oil level. If the oil is contaminated, change it. Warning! When checking the...

Transmission oil change
Warning! When changing gear oil, the vehicle must be in a horizontal position. Order of execution 1. Remove the drain plug and drain the gear oil from the gearbox into a...

Replacing the oil seal ring of the drive shaft
Order of execution 1. Disconnect the drive shaft from the gearbox. 2. Use a flathead screwdriver to remove the O-ring from the gearbox housing. Warning! Clean the O-ring...

Replacing the speedometer cable
Order of execution 1. Insert the adapter correctly from the back into the instrument cluster and secure the new speedometer cable. 2. Install the O-ring so that the...

Removal and installation of a transmission
Manual Transmission 1 - bolt, 27–34 Nm; 2 - speedometer cable; 3 - clutch housing cover; 4 - bolt, 8–10 Nm; 5 – a cable of a choice of transfers; 6 – a cable of a gear...

Gearbox repair
The gearbox is a very complex unit and its repair must be carried out in a specialized workshop. Also, when removing and installing many parts, it is necessary to...

Gear shift mechanism
1 - cable selection and gear shifting; 2 - bracket; 3 – bolt, 9–14 Nm; 4 – lever handle; 5 - gearshift lever; 6 - casing; 7 - bolt, 9–14 Nm. Withdrawal 1. Remove the...

Hydraulic clutch
1 - clutch drive hose; 2 – a tube of a drive of coupling; 3 – the main cylinder of coupling; 4 - clutch pedal. Withdrawal 1. Turn out the pumping union and merge a brake...

Gear shift lever
1 - bracket; 2 - bolt, 9–14 Nm; 3 – lever handle; 4 - gearshift lever; 5 - casing; 6 - bolt, 9–14 Nm. Examination 1. Check bushing for wear and damage. 2. Check the...