Car clutch Hyundai Accent 2

General clutch information
The clutch is located between the engine and the gearbox and is designed to disconnect and connect the flywheel located on the engine crankshaft and the gearbox input...

Clutch technical data
clutch drive Hydraulic Friction lining diameter (external x internal) 200x130 (1.5 l) 184x127.5 (1.3 l) Master cylinder inner diameter 20.64 mm Internal diameter of the...

Clutch pedal adjustment
Order of execution 1. Measure the distance from the front of the pedal to the carpet. Press the clutch pedal with your hand until you feel resistance and measure the...

Bleeding the clutch hydraulic system
Any hydraulic system works normally if air is removed from it. Warning! During bleeding, add only clean fluid recommended by the manufacturer. Warning! The fluid used in...

Clutch driven and pressure plates
Clutch 1 - clutch release fork; 2 - clutch release bearing; 3 - bolt, 15–22 Nm; 4 - clutch pressure plate; 5 - driven clutch disc. Order of execution 1. Drain the...

Clutch Master Cylinder
1 - body; 2 - tank cover; 3 - tank; 4 - bolt, 13–17 Nm; 5 - cover; 6 - pusher; 7 – a lock ring of the piston; 8 - piston. Disassembly 1. Remove the top tank strap, tank...

Clutch pedal — removal and installation
1 - bolt, 8–10 Nm; 2 – the switch of blocking of the lock of ignition; 3 - return spring; 4 - clutch pedal bracket; 5 - nut, 19–28 Nm; 6 - bushing; 7 - clutch pedal; 8 -...

Clutch slave cylinder
1 - hollow connecting bolt; 2 - gasket; 3 - connector; 4 - valve plate; 5 - spring; 6 - clutch slave cylinder; 7 - fitting for air removal; 8 - return spring; 9 -...

Troubleshooting
sign Probable Cause Elimination Method Clutch slip The car does not accelerate when the engine speed is increased Insufficient vehicle speed Lack of power on climbs...