Car engine lubrication system Hyundai Accent 2

General description of the lubrication system
The lubrication system consists of an oil pan, an oil pump, an oil filter and various channels. The oil pump is driven by the crankshaft. The bypass valve in the oil...

Technical data of the lubrication system
Name Ratings Oil pump Clearance between outer gear and front cover 0.12-0.18mm Clearance between inner gear and front cover 0.04 - 0.065 mm Clearance between outer and...

Engine oil selection
It is recommended to use engine oils of SG or SG/CD viscosity grades shown in the figure. For optimal lubrication and maximum engine protection, select oils that meet...

Oil pressure sensor
1. The oil pressure warning lamp comes on when the ignition is switched on and goes out when the engine is started. If the lamp does not light after the ignition is...

Checking the engine oil level
Order of execution 1. Park the vehicle on a level, level ground. 2. Warm up the engine to normal operating temperature and turn it off. 3. Wait 5 minutes for the oil to...

Engine oil change
Warning! Be careful when changing engine oil as the oil is hot and can cause burns. Order of execution 1. Warm up the engine to normal operating temperature and turn it...

Oil filter replacement
All engines are equipped with a high quality, disposable oil filter. Warning! Be careful when changing the engine filter, as the oil is hot and can cause burns. Order of...

SOHC engine oil pump
1 – plug, 40–50 Nm; 2 - sealing ring; 3 - plunger; 4 - bolt, 12–15 Nm; 5 - front sealing ring; 6 - front cover; 7 – an internal gear wheel of the oil pump; 8 – an...

DOHC engine oil pump
1 - mesh oil filter; 2 - bolt, 15–22 Nm; 3 - gasket; 4 - plug; 5 - spring; 6 - bolt, 20–27 Nm; 7 - front sealing ring; 8 - front cover; 9 – an internal gear wheel of the...