Order of execution
1. Remove the rear seat cushion and remove the fuel pump inspection panel. To relieve pressure in the fuel system, disconnect the fuel pump connector, start the engine and wait until it stops due to the exhaustion of fuel from the fuel lines and fuel line.
2.Disconnect the wire from the negative battery terminal and connect the fuel pump connector.
Warning! Depressurize the fuel system before disconnecting the fuel lines, otherwise pressurized fuel will leak out of the fuel system.
3. Turn out screws of fastening of clips of tubes of the fuel filter.
Warning! Cover the fuel filter with a towel to prevent splashing of fuel caused by residual pressure in the fuel line.
4. Turn out bolts of fastening of the fuel filter and remove it from an arm.
5. After replacing the fuel filter, check the fuel system for leaks.