![](https://www.hyundaibook.ru/img/accent/3182.jpg)
1 - air conditioning compressor; 2 - bolt, 20.4–30.6 N·m; 3 – an air conditioner compressor pulley; 4 - bolt, 17 Nm; 5 - bracket air conditioner compressor; 6 - tension roller; 7 – a belt of a drive of the compressor of the conditioner; 8 - crankshaft pulley.
Withdrawal
1. Discharge the air conditioning system.
2. Disconnect the electrical connector from the magnetic clutch.
3. Raise the vehicle.
4. Loosen the tension and remove the A/C compressor drive belt.
5. If necessary, remove the front muffler mounting bolts.
6. Remove the discharge hose and suction filter.
![](https://www.hyundaibook.ru/img/accent/3183.jpg)
7. Turn out bolts of fastening of the compressor of the conditioner.
8. Remove the air conditioner compressor. Close all open openings and pipes immediately to prevent moisture from the air from entering the air conditioning system.
![](https://www.hyundaibook.ru/img/accent/3184.jpg)
Installation
9. Installation is carried out in the reverse order of removal, taking into account the following:
- fill the compressor with fresh oil;
- before installing the sealing rings, lubricate them with oil;
- do not lubricate the connecting nuts of the fittings of the air conditioning compressor;
- tighten the inlet and outlet hoses to the required torque;
- Adjust the tension of the A/C compressor drive belt.